HappyWindows
Document details
| Property | Value |
| Name | SignalTimer |
| Description | SignalTimer measures the time between two signals of a slave device. The slave device must do the following: - Waits for a start signal HIGH from the PC - Sends to PC two consecutive LOW signals for the PC to display the time between them. Use TTL signals only (Warning: use carefully, as may cause damage to your computer) 1. Start program (force pins 2-9 to output LOW) 2. Connect the external slave device to PC 3. Press Start button (force pin 2 to output HIGH for 200ms then back LOW) 4. Receive the first external LOW signal on input-pin 13 5. Receive the second external LOW signal on pin 12 |
| Filename | Link: http://www.j2me.info/SignalTimer.rar |
| Created On: | 06.10.2008 12:01 |
| Viewers | Everybody |
| Hits | 380 Hits |
| Last updated on | 06.10.2008 12:04 |
